The Talbert Channel Ocean Outlet Project
The Talbert Channel Ocean Outlet Project consisted of relocating and enlarging the outlet of a relatively narrow, shallow flood control channel in Southern California. Noteworthy aspects...
Construction on Wisconsin's Lake Michigan Coast
This paper provides a preliminary evaluation of a set of 100 residential properties along Wisconsin's Lake Michigan coast; an examination of the vulnerability of coastal homes and adequacy...
Dutch Experience on Design of Dikes and Revetments
The increased demand for reliable design methods for protecting structures has resulted in The Netherlands in preparing a set of design guidelines for design of dikes and revetments. The...
Development of Detached Breakwater Design Criteria Using a Shoreline Response Model
An evaluation of beach response to detached breakwaters was conducted using the numerical shoreline response model GENESIS. Functional design parameters such as structure length, gap distance,...
Robust Approach to Wave Runup Calculation
Wind wave runup on a natural beach is examined for the case of an irregular wave forcing function. A pragmatic approach to the calculation of the runup time series and the corresponding...
Remote Automated Wave and Water Level Monitoring System Deployed at Agat Harbor, Guam
Agat Harbor, Guam is a small boat harbor excavated from a coral reef flat and protected by a detached breakwater. An automated monitoring system was designed and installed to observe wave...
Passive Acoustic Emission for Quantitative Evaluation of Freeze Thaw and Alkali Aggregate Reaction in Concretes
Several experiments are reported in which the progression of freeze thaw (FT), alkali-aggregate reaction (AAR), and internal cracking caused by mechanical loading were monitored using...
Damage Assessment in Concrete Using Acoustic Emission
An acoustic emission (AE) is a localized rapid release of strain energy in a stressed material. This energy release causes stress waves to propagate through the specimen. These acoustic...
Study of Three Dimensional Crack Tip Location of Mortar by Acoustic Emission
Plain mortar specimens were tested under three-point bending. Experimental variables include the width of the specimen and the notch-to-depth ratio. The experimental results of 12 specimens...
Sonic NDE of Structural Concrete
Case histories are presented to illustrate applications of nondestructive evaluation (NDE) methods that use stress waves to characterize the conditions of concrete construction. The case...
A Critique of the Ultrasonic Pulse Velocity Method for Testing Concrete
The pulse velocity method is the most widely used ultrasonic nondestructive method for assessing concrete quality. However, it has been well established that the relation between ultrasonic...
Nondestructive Crack Identification by Acoustic Emission Analysis and Ultrasonic Frequency Response
Nondestructive evaluation (NDE) by the acoustic emission (AE) analysis and the ultrasonic testing (UT) on the spectral (frequency) response is studied to identify crack geometry. AE waveform...
Shoaling and Breaking of Random Wave Trains: Spectral Approaches
We describe recent efforts to develop a model to predict the evolution of the spectra of random ocean waves shoaling and breaking on a natural beach. A model based on the full Euler equations...
Wave Interaction with Fluid Mud in Rectangular Trench
Wave interaction with fluid mud in a rectangular trench is studied theoretically based on small-amplitude wave theory. The problem was formulated using the Voigt model for an viscoelastic...
Nonlinear Shoaling and Impact of Waves on Coastal Structures
A two-dimensional fully nonlinear potential flow model is used to calculate shoaling of solitary and enoidal waves over a sloping bottom and interaction with submerged or emerged coastal...
The Effect of Wave Grouping on the Characteristic Wave Height
Wave data from two field stations and from the laboratory tests have been analyzed. The groupiness factor is used to categorize the wave data for the discussion of the correlation between...
Taylor-Galerkin Method for Wind Wave Propagation
Recently Taylor-Galerkin method has been used to successfully solve advection-dominated flow problems. This method performs quite well in reducing numerical dissipation and numerical dispersion...
Intermittent Kinematics for Nonlinear Random Waves Near Ocean Surface
Taking into account the fluctuations of the free surface for points in the vicinity of the still water level, this study analytically calculates the first four moments of wave velocity...
Micromechanical Characterization of Damage-Plasticity in Metal Matrix Composites
A micromechanical theory of damage mechanics and plasticity is proposed for fiber-reinforced metal matrix composites. The composite system is assumed to consist of elastic, continuous...
Seismic Wave Propagation by Finite Differences on the Connection Machine
Seismic modeling represents a difficult numerical challenge and consumes a significant amount of CPU time on the largest available supercomputers. With the advent of massively-parallel...
Return to search